Apple IIC 2 PC Help!!!

[Leonard <leonard@voicenet.com>]

Ok, I went on some of the apple sites and got the pin outs for a null 
modem cable.  I carefully made one up.  I checked and rechecked the 
wiring.  It checks ok.  This is how I wired it:

       Apple 5 Pin                          PC 9 Pin

        Pin 1 DTR -------------------------> Pin 6 DSR
        Pin 2 TD --------------------------> Pin 2 RD
        Pin 3 GND -------------------------> Pin 5 GND
        Pin 4 RD --------------------------> Pin 3 TX
        Pin 5 DSR -------------------------> Pin 4 DTR

In addition I shorted pins 1 & 6 together on the pc side.

I am running hyper terminal on the pc set at 9600, 8N1, and the same on 
the apple IIC.  I am using a program on the apple called Proterm.  I am 
using apple's unstandard way of wiring the 5 pin connector (it doesn't 
match up with the numbering on the connector itself).  It is as follows 
   (male and looking at it from the front).

  1       5
   2     4
      3

This is driving me batty!!  Has anyone else played around with this? 
What are you using?  I have no way of getting stuff from the internet 
over to the apple except through my pc.  I was going to transfer from 
the pc to the apple using terminal programs, but I must be missing 
something.  Before I forget it, I can set hyper terminal to send using 
hardware control, or software.  What should it be?  I don't know what 
the apple program is using (Proterm).  I have no documentation on the 
program.

Thanks for reading, and any help!!

Leonard