IIgs Network Boot Setup

["Macnlos" <macnlos@mindspring.com>]

I have a Quadra 700 running AppleShare 3.0.3 now.

I have a IIgs ROM 01 with 4 floppy drives (2-3.5" and 2-5.25").

I have been trying to find some information regarding how to setup the
systems so the IIgs can network boot off of the Quadra 700.

I connected the two via LocalTalk boxes.  The localtalk box on the IIgs is
plugged into the printer port.

I went into the IIgs control panel and set Slot 7 to AppleTalk Network and
changed Slot 1 to Your Card.  I also set the startup disk to slot 7 instead
of scanning.

Now back on the Quadra, I did install the AppleShare with Apple II support.

The question is how do I setup GSOS 6.0.1 on the Quadra server and configure
AppleShare to show it?

Thanks,
Macnlos