Re: How Do I Connect Apple IIe to Panasonic Printer?

["Bob Murphy" <moviebooks@usa.net>]

Thanks to all who responded.  My printer seems to be functioning OK.

Bob Murphy
moviebooks@usa.net
"william strutts" <wrstrutts1@nospam.home.com> wrote in message
news:Wymn7.101398$K6.40408538@news2...
> <penman-no-spam@cotse.com> wrote in message
> news:cGVubWFu.491f6b161659f26cc24b5db5ccfde0e3@1000144784.cotse.com...
> > Printers are Joe Kohn's area of expertise, but maybe I can help:
> > All you need is a parallel printer card in your //e--usually placed
> > in slot 1.  Depending on what you're printing (and I can't remember
> > if this particular Panasonic printer is a NLQ 24-pin model or not)
> > you may need printer drivers.  For example, if you're using
> > AppleWorks, there's a printer driver for the Panasonics that'll give
> > you NLQ output;  the disk the driver's on can be ordered from Joe
> > Kohn or downloaded from the trenco FTP site.
> >
> > Penman
> >
> >
>
> I think most Panasonics had some kind of Epson compatibility.
> I had a Panasonic KXP-1091 that you could run using Epson
> FX-80 mode or something like that.
>
> --
> --
> William R. Strutts - wrstrutts1@nospam.home.com - Whatever!
>
> C'est moi!  http://www.facelink.com/wrstrutts
>
> Just hacking away...
>
> Remove nospam to reply.
>
>