Question: AE Colorlink

[Steven Hirsch <snhirsch@gmail.com>]

Does anyone know what monitors the AE Colorlink is intended to work with?  It 
has two outputs, one came with an adapter for an IBM CGA/EGA style DB9 
connector and the second header on the card is intended for an "Apple" monitor 
- the manual is no more explicit than that!  I do not have the adapter for the 
15-pin, but sat down and built what I believe is the correct setup to bring 
out to a DB15F.  I cannot get display on either output, unfortunately.

Have tried a CGA adapter normally used with a Tandy CoCo (9-pin plug) and the 
Highway converter used with a IIgs (15-pin, with external 12V supply to switch 
the adapter into external video mode).

Looking at the circuitry, I'm thinking the 9-pin output is TTL level and the 
15-pin is analog video (uses a couple of driver transistors).  It's possible 
that I did not figure the pinout properly, I suppose.

If anyone with a ColorLink has time to take an ohmmeter to the 15-pin cable, 
I'd like to verify the wiring.