Re: Wanted: RamFAST SCSI card

[Robert Boucher <boucher1@alumni.utexas.net>]

Wayne Stewart wrote:
> 
> Raj Wurttemberg wrote:
> 
> > I have tried it on three Iomega SCSI Zip 100's and one SCSI Zip 250.
> > Used different cables and everything. It even faults out in the
> > configuration screen sometimes. :(
> >
> > I think it's a toasty critter....
> 
> Sounds like it's likely toast since you've checked out almost ecerything.
> Only other possibility I can think of is if you're getting a bad contact
> between the card and slot. I've never run into that one but the recomended
> way seems to be to pull the card and clean off the fingers using a pencil
> eraser. Sort of a long shot but about the only one left.
> 
>     Wayne

If you try this, rub each finger length ways, starting from up on the
card, rubbing toward the edge. Do not rub from the edge up, or across
the fingers. If you do, the finger might break, or come loose. (Ask me
how I know!)