Re: Wanted: RamFAST SCSI card

["william strutts" <wrstrutts1@nospam.home.com>]

"Raj Wurttemberg" <raj@intelstarbase-01.net> wrote in message
0u37ptg7stce2flne33igb1f238sgpe03d@4ax.com">news:0u37ptg7stce2flne33igb1f238sgpe03d@4ax.com...
>
> Just to make sure I'm doing this right...
>
> What are the correct settings for RamFAST card?
>
> 1) Jumper on the card ?

No jumpers.

> 2) External Terminator needed ?

None required.

> 3) External termination Active or Passive ?

None required.

> 4) SCSI ID for the boot device ?

Any ID is acceptable. The RamFAST does not use a SCSI ID so
any ID from 0 to 7 is acceptable.

>
> Also, is there a disk that goes with the RamFAST card? If so, would
> someone please send it to me or tell me where I can download it?

Unplug SCSI devices, press 0 when booting up and it will go into
the utilities which is a ROM disk.

> Thanks,
> /*Raj*/
>

If you need documenation, I have a copy of it in MS Word format that
I can email you.
--
--
William R. Strutts - wrstrutts1@nospam.home.com - Whatever!

C'est moi!  http://www.facelink.com/wrstrutts

Just hacking away...

Remove nospam to reply.
>