[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Vtech UDC (WAS: New to the Apple IIGS, unknown card in slot 7)

Subject: Re: Vtech UDC (WAS: New to the Apple IIGS, unknown card in slot 7)
From: Wayne Stewart <waynes@intergate.bc.ca>
Date: Wed, 25 Jul 2001 17:33:38 -0700
Newsgroups: comp.sys.apple2
Organization: Posted via Supernews, http://www.supernews.com
References: <B783B69F.9A41%msc1983@mac.com> <B783C53B.9AE1%msc1983@mac.com> <B783D0EB.9B05%msc1983@mac.com> <3b5eaf79@news.iprimus.com.au> <9jms2j02i5v@enews3.newsguy.com>
Xref: archiver1.google.com comp.sys.apple2:11465

Yes, that firmware will allow the short vard to use the 3.5" unidisk, however
the
platinum 3.5 is a lot faster than the 3.5" unidisk. Anyways I have that
firmware on hand

    Wayne

David Chiu wrote:

> Someone mentioned sometime ago that the "short card" version of UDC can be
> made to work with Unidisk 3.5 provided that it uses the firmware from the
> "long card" version of UDC. Would the said firmware be available somewhere?

References:
- New to the Apple IIGS, unknown card in slot 7.
  - From: "Matthew S. Carpenter" <msc1983@mac.com>
- Re: New to the Apple IIGS, unknown card in slot 7.
  - From: "Matthew S. Carpenter" <msc1983@mac.com>
- Re: New to the Apple IIGS, unknown card in slot 7.
  - From: "Matthew S. Carpenter" <msc1983@mac.com>
- Re: New to the Apple IIGS, unknown card in slot 7.
  - From: "Mark Cummings" <figjams@primus.com.au>
- Vtech UDC (WAS: New to the Apple IIGS, unknown card in slot 7)
  - From: "David Chiu" <none@nowhere.org>

Prev by Date: Re: Looking for pics of IIGS hardware expansion cards
Next by Date: Re: If you could design a $300 homecomputer today, what would you choose?
Previous by thread: Vtech UDC (WAS: New to the Apple IIGS, unknown card in slot 7)
Next by thread: Re: New to the Apple IIGS, unknown card in slot 7.
Index(es):
- Date
- Thread