[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: AE Ramworks III
- Subject: Re: AE Ramworks III
- From: a2mg@aol.comNomail (A2MG)
- Date: 22 May 2001 18:34:11 GMT
- Newsgroups: comp.sys.apple2
- Organization: AOL http://www.aol.com
- References: <ZwxO6.2632$e6.16086@news1.rdc1.tx.home.com>
- Xref: archiver1.google.com comp.sys.apple2:8055
I believe you need Ram Driver software for this card. The Applied engineering
software which came with this card included a Ram Driver. Or, even better, use
the Ram driver that comes with ProSel 8. Just get hold of the ram driver
software, and run it. This puts "up" the Ram disk. You do not have to format
it. There are a lot of very high-end things you can do with this ram disk
setup. I wrote an article on it, let me know if you would like a copy of it
(mailed in US only).
Beverly Cadieux
TEXAS II an international newsletter for users of AppleWorks(R) 5.1