Re: RamWorks Expander Modification?

[mjmahon@aol.com (Michael J. Mahon)]

Mark Cummings wrote:

>I don't have one of those Expander cards, but the RWIII manual indicates
>that pins 1, 2, 3 & 13 on the row of 24 pins (1 is at the bottom) should be
>cut for a Rev-B 512K Expander that is being used on a RWbasic, RWII or
>RWIII.
>It also states that this modification is not required for the Rev-C 512K or
>2M expander.
>A comical note says to count the pins carefully as they take a long time to
>grow back. :)

Sounds like a better modification would be to cut the traces to those
pins on the Rev-B 512K expander, so as not to co-opt the possibility
of a 2MB expander down the road!

-michael

 Email:  mjmahon@aol.com
 Home page:  http://members.aol.com/MJMahon/