Re: How to tell if HD will work with //c

["Frank Townsend" <ftownsen@iamdigex.net>]

Quark QC10 and QC20 also work with the original IIc through the 5-1/4"
floppy port.

Performance is quite fast, and the drives are quiet.


"ChuckNewby" <chucknewby@aol.com> wrote in message
20010402220655.00944.00002014@ng-ck1.aol.com">news:20010402220655.00944.00002014@ng-ck1.aol.com...
> >I've been looking for a HD for my //c for quite a while.
>
> Just about the only drive that will work on a IIc is one from Chinook,
whose
> products were taken over by Sequential Systems.  This is because the SCSI
> interface was built into the drive enclosure, so to speak.  This external
drive
> plugged into the 3.5" drive port so was not pure SCSI.  I have NEVER seen
one
> of these on the USED market.