[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: How to tell if HD will work with //c

Subject: Re: How to tell if HD will work with //c
From: chucknewby@aol.com (ChuckNewby)
Date: 03 Apr 2001 02:06:55 GMT
Newsgroups: comp.sys.apple2
Organization: AOL http://www.aol.com
References: <16676-3ABFEEC1-75@storefull-153.iap.bryant.webtv.net>
Xref: supernews.google.com comp.sys.apple2:7022

>I've been looking for a HD for my //c for quite a while.

Just about the only drive that will work on a IIc is one from Chinook, whose
products were taken over by Sequential Systems.  This is because the SCSI
interface was built into the drive enclosure, so to speak.  This external drive
plugged into the 3.5" drive port so was not pure SCSI.  I have NEVER seen one
of these on the USED market.

Chuck Newby

Follow-Ups:
- Re: How to tell if HD will work with //c
  - From: "Frank Townsend" <ftownsen@iamdigex.net>

References:
- How to tell if HD will work with //c
  - From: sirarlias@webtv.net

Prev by Date: Re: Cable for Apple II High Speed SCSI Card
Next by Date: IIe Language Support
Previous by thread: re: How to tell if HD will work with //c
Next by thread: Re: How to tell if HD will work with //c
Index(es):
- Date
- Thread