[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: ADT Not Working

Subject: Re: ADT Not Working
From: jean-marie.heriat@wanadoo.fr (Jean-Marie HERIAT )
Date: Fri, 23 Feb 2001 15:06:52 GMT
Newsgroups: comp.sys.apple2
Organization: Wanadoo, l'internet avec France Telecom
References: <0rqg6.3909$AE5.896726@typhoon.austin.rr.com>
Reply-to: jean-marie.heriat@wanadoo.fr
Xref: supernews.google.com comp.sys.apple2:6500

On Thu, 08 Feb 2001 05:48:44 GMT, "Krack" <krack@kracker.com> wrote:

>I am trying to load adt on my apple IIe. I have set the jumper settings for
>"terminal" per the faq from this newsgroup. I am using a stright through
>serial cable per the instructions. When i try to send a text file from hyper
>terminal on my win98 system my apple II gets lines of little \ then beeps
>quickly 7 times at the end of every line. It does this for a few minutes
>then stops. No new files are on the 5.25 disk. I have unchecked "send line
>ends with line feed" from hyper terminal.
>

 you must use a straight cable

References:
- ADT Not Working
  - From: "Krack" <krack@kracker.com>

Prev by Date: an apple2GS emulator
Next by Date: Re: Asimov .shk archives
Previous by thread: Re: ADT Not Working
Next by thread: Where to find software for Apple II and IIGS
Index(es):
- Date
- Thread