Re: What's system does a ROM01 support?

[dalloff@gcfn.org (Dave Althoff Jr)]

Mike Keppel (lps_keppel@hotmail.com) wrote:
: Well,

: I boot up System 6.01 (which works fine with my Rom03), but once the status
: bar (red bar that goes across at load time) gets to the end the loading
: stops.  It is followed with a blue screen that says "Sorry, system error
: $0201 occured while trying to run the next application.  It then gives me a
: choice to either Return or Restart.

: There is a full meg of ram on the ram card inside the Rom01.  I also used
: the same disk drive that worked fine with my Rom03.

...And you do have the jumpers in place on the memory card, so the whole
1.25Mb shows up, right?  Just checking.

Just for grins, have you tried a shift-boot?  To get 6.0.1 to work on a
1.25Mb GS you might have to strip it down a little.  To also use AppleTalk
you have to strip it down even more.

(Dave pulls a couple of dusty books off the shelf and looks)
Hmmm...Assuming that I'm reading the right thing, it says that error
numbers greater than $0100 are specific to the tool sets, so that would be
Error $01 from Tool $02...

Guess what:  It says here in the toolbox reference that Tool $02 is the
Memory Manager and Error $01 is "Unable to allocate block."  Looks like
GS/OS is running out of memory.  Try a shift-boot, and start clearing out
any unneeded INITs and DAs.

AD AD C4 E1 F6 E5 A0 C1 EC F4 E8 EF E6 E6 AC A0 DD DB 8D 8-)

-- 
    /X\        _       _               _*** Closed for the season ***
   /XXX\      /X\     /X\_      _     /X\__      _     _        _____  
  /XXXXX\    /XXX\  _/XXXX\_   /X\   /XXXXX\    /X\   /X\      /XXXXX
_/XXXXXXX\__/XXXXX\/XXXXXXXX\_/XXX\_/XXXXXXX\__/XXX\_/XXX\_/\_/XXXXXX