[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: DSK2FILE

Thanks everybody.

In article <3964F7D1.24FE9FAC@swbell.net>, rubywand@swbell.net wrote:

> Jon Bettencourt writes ...
> > 
> > DSK2FILE says it converts DOS 3.3 disk images on to disks. Does it work
> > for images of ProDOS disks too?
> 
>      Yes.
> 
> > Can I simply change the section that reads
> > "Load DOS 3.3 -> ProDOS Map"?
> > 
>  ....
> 
>      Don't recall those options. If you are talking about disk image sector
> ordering, it is independent of disk content. In general, all 5.25" diskette
> images should be in DOS 3.3 order and have the .dsk suffix.
> 
>      An image file with the ".po" suffix is supposed to have ProDOS sector
> ordering. (Images with names ending in ".do" are supposed to have DOS 3.3
> sector ordering. The ".do" suffix has fallen into disuse in favor of ".dsk".)
> 
>      In going from disk image file ---> diskette, you pick the sector
> ordering which matches the image file sector ordering. The target diskette
> can, almost always, be a DOS 3.3 INITed diskette.
> 
>      For more about this stuff, see ...
> 
> http://home.swbell.net/rubywand/Csa2FLUTILS.html#006  .
> 
> 
> 
> Rubywand

Tammy and TIA,
----> Jon.

= jonrelay@napanet.net === ICQ# 76731065 === kellys.home.dyndns.org =