[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Can I make my new HD bootable on my IIe?

Subject: Re: Can I make my new HD bootable on my IIe?
From: "Ernest" <ernestls@home.com>
Date: 2000/06/07
Newsgroups: comp.sys.apple2
Organization: @Home Network
References: <s8_Z4.85207$55.697444@news1.sttls1.wa.home.com> <393891B5.9AC057F3@inetnebr.com> <%Ma_4.86080$55.708231@news1.sttls1.wa.home.com> <39399BD2.9737C9A3@inetnebr.com> <1ebqlxx.2zykn913sj1hcN%dempson@actrix.gen.nz> <393c995f$1@news.uow.edu.au>


>
>Yet another solution I have used in one of my //e computers is to modify
>the monitor ROM. My //e scans the slots from 1..7 instead of the usual
>7..1. This meant I could put my SCSI card in slot 4 or 5 where Apple Pascal
>1.3 could also find it. Then if the SCSI card does not boot the scan
reaches
>the Disk ][ card in slot 6.
>--
>David Wilson  School of IT & CS, Uni of Wollongong, Australia

Interesting... I have an EPROM burner but I have no idea how to rewrite the
ROM code. Do you have an image of the code that you used?

Ernest

References:
- Can I make my new HD bootable on my IIe?
  - From: "Ernest" <ernestls@home.com>
- Re: Can I make my new HD bootable on my IIe?
  - From: Roy and/or Janet Miller <millers@inetnebr.com>
- Re: Can I make my new HD bootable on my IIe?
  - From: "Ernest" <ernestls@home.com>
- Re: Can I make my new HD bootable on my IIe?
  - From: Roy and/or Janet Miller <millers@inetnebr.com>
- Re: Can I make my new HD bootable on my IIe?
  - From: dempson@actrix.gen.nz (David Empson)
- Re: Can I make my new HD bootable on my IIe?
  - From: david@uow.edu.au (David Wilson)

Prev by Date: Re: IIGS & Zip Acclerator
Next by Date: Re: SCSI drive with Focus drive?
Previous by thread: Re: Can I make my new HD bootable on my IIe?
Next by thread: Re: Can I make my new HD bootable on my IIe?
Index(es):
- Date
- Thread