Re: Apple IIgs in IIe case?

[Wayne Stewart <waynes@intergate.bc.ca>]

No, it's fairly easy if you have a IIgs board with the IIe connectors.  However
the mounting holes aren't the same so you'd have to make your own. Also
the cutouts in the back of the IIe case doesn't match up with the IIgs board
so they'd need to be modified.
If you happen to have an extra IIgs power supply, it had the mounting holes that
make it a great replacement for the IIe one in this case

The ROM 3s don't even have a place for those connectors. While most of the ROM
0 -1s don't have the connector, they all have the solder pads where one can be easily
added if desired

    Wayne

sloopy malibu wrote:

> excuse my ignorance here but is this dificult? are the mounting holes different?
> i have 2 gs's (one i use, the other is for looking at the m/b for wiring and setup)
> and it would seem it would be a drop in replacment seeing as the power and keyboard
> already have connectors on the board... only thing i can think of is all gs's dont
> have these connectors.....