[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Hyperdrive FX?
- Subject: Re: Hyperdrive FX?
- From: mystix@direct.ca@direct.ca
- Date: 2000/03/24
- Newsgroups: comp.sys.apple2
- Organization: Society For Orange Pavement
- References: <3KDC4.11390$QY4.488263@news0.telusplanet.net> <QVDC4.11393$QY4.489249@news0.telusplanet.net> <faEC4.547$H7.62274@brie.direct.ca> <jYFC4.11463$QY4.492846@news0.telusplanet.net>
- Reply-to: mystix@NOSPAMdirect.ca
In <jYFC4.11463$QY4.492846@news0.telusplanet.net>, "Sheane and Bonnie Meikle" <action1@telusplanet.net> writes:
>I guess I should ask more specific questions. How do you set the scsi ID as
>there is no switch. Also it doesn't have 25 pin in or out, so if I get an
>adapter is it all right to switch back and forth? How do you tell whether it
>supplies termination power?
Well first of all, you ought to open up the case to see who made the drive.
With that information, you can find out how to set SCSI ID through jumper
jumper blocks, and whether or not it has termination power on, which will
also be set by jumper if available. With some older drives used with Mac's,
there is occasionally parity settings, which you should disable before using
on your GS.