Re: HELP HELP HELP ADT122

[Delfs <delfs@NOSPAMapple2.com>]

Sounds like you do not have a hardware handshaking null modem cable.
Modify your serial cable to short your handshaking lines (6,8,20 on the 25
pin port)
Hope this helps,
Ed

"Avram J. Berman" wrote:

> I got my dos 3.3 master disk and booted it up and typed in#2 and then
> control a and got the ssc: prompt and then typed 6b for 300 baud - that
> was simple.  I set the dip switches on the super
> serial card according the the adt122 documentation, using a null modem
> cable - that was simple.
>
> At the dos prompt I typed in:
> mode com1: baud=300 data=8 parity=n
> and then
> type adt.dmp >com1:
>
> "yes I am in the right directory with the right path to adt.dmp
> I get the message, "write fault error writing device 1.  Does this mean
> the problem is on the pc side or the apple?"
>
> so close and yet so far.
> kindest regards aj
>
> p.s. when i load up adt.exe on the pc and choose com:1 it see's it.