Re: TWGS oscillator

[quadrajet1@aol.com (Quadrajet1)]

>What corner does the little dot on the oscillator need to face? Top-right?
>it is missing the oscillator, so if put one in wrong, could harm be done?
>
>I am told The board was working at 6Mhz. (w/ a 25?) but as I will need to
>go buy one I wanted to try something higher. 
>
>{My zipGS took a 40 w/ no problem}
>
>Does it matter what rev. the TWGS is? This one says 1.4x 8H on the chip.
>
>thanks.
>
>-Louis

   Look on the back of the board.  One of the solder holes that the socket
mounts to will be a different shape than the other 3.  The pad with the square
trace (most common) is pin 1, which corresponds to the dot on the oscillator.

Raymond