Re: TWGS oscillator

[mystix@direct.ca@direct.ca]

In <19991025014537.01524.00000794@ng-fp1.aol.com>, supertimer@aol.com (Supertimer) writes:

>>This orientaion will work for the half-size on the TWGS, but cannot but
>>used for the rectangular Zip, correct?
>
>Not sure about Zip GS.  On the TWGS (opened the IIGS
>case to take a look), the dot and the sharp corner
>coincided at the top-left.
>
>Open your IIGS case and take a look at the oscillator
>on the Zip GS.  I am guessing that it should be the
>same on the Zip GS.  I can't be sure without a Zip GS
>to look at.

The universal "Pin 1 Rule" is on the back side, the solder point that is square
is pin 1.