Re: Sequential Systems MegaBUFF card

[j.pendarvis@genie.com]

>
>I've got a Sequential Systems MegaBUFF (1 MB print buffer/AppleTalk
>interface) card in an ImageWriter II that I want to move to an
>ImageWriter LQ instead, but I seem to have lost the manual and don't
>know if I need to change any of the switch settings.  Would any of you
>who might happen to have one of these be able to tell me what the
>switch
>settings are for?  Thanks!
>
>--
>John E. Townsend
 
I hope the following helps:  - jim
 
 
Errata page for Appendix A
Serial Mode Switch Settings
 
Switch 1 - Mode of Operation
 
 off - Network Mode
 on  - Serial Mode
 
 
Switch 2 - Command Translators
 
 off - Disable
 on  - Enable
 (Use with ImageWriter LQ)
 
 
Switch 3 & 4 - Baud Rate (bps)
 
 off,off -  9600
 on,off  - 19200
 off,on  - 38400
 on,on   - 57600
 
---------------------------------
Appendix A
Network Mode Switch Settings
 
Switch 1 - Mode of Operation
 
 off - Network Mode
 on  - Serial Mode
 
 
Switch 2 - Command Translators
 
 off - Disable
 on  - Enable
 
 
Switch 3 - Power-Up Self Test
 
 off - Disable
 on  - Enable
 
 
Switch 4 - No Function
------------------------------------