Re: IIc Disk Images & Serial Comms -> PC ....Help please!

["stef B. News" <stephane.baudot@fnac.net>]

Hi
and sorry for my english, I'm french.

Try this home page
www.multimania.com/apple2c
www.multimania.com/apple2c/tech/Transfert.htm


In french but you have a table for the cable.
I transfert disk between my pc and my pc regulary

If you have sp�cific question about transfert mail me.
--
____________________________________
     www                @+                            STEF
      � �
       �                   stef_from_gaia@hotmail.com
        ~                  stephane.baudot@fnac.net
____________________________________
<chrisdug@iafrica.com> a �crit dans le message :
37d53fa4.1719775@news.iafrica.com...
> Hi there
>
> I recently discovered the vast amount of Apple II software on the net,
> so I dug out my IIc and tried to get some on disk.  I downloaded ADT
> 1.20 and hooked up my 486 to the Apple using an old Apple Scribe cable
> to a Laplink serial cable.
>
> Now here's the problem: ADT requires booting off a DOS 3.3 disk, which
> I don't have.  I tried the procedure with ProDos 1.0.2 (the only
> version I've got) and no joy.  Is my problem the cable or the OS???
>
> If it's the OS, how could I get hold of Dos 3.3 boot disk?  I think
> Apple left my country( South Africa)  before it was released, because
> we never saw it.  If the cable is the problem, where will I get the
> cable from 25 pin PC to 5 pin round Apple?
>
> Any help would be greatly appreciated
> Rory