Re: Wanted: Lazer Universal Disk Controller

[supertimer@aol.com (Supertimer)]

"Robert Collet" <collet@worldnet.att.net> wrote:

>I dont know if its the same controller I have, but the laser disk controller
>and disk drive I use only works with dos 3.3, and pascal, and wont boot
>prodos or run GEOS for that matter. Its really weird, I tried adjusting the
>speed and every diagnostic I've used turns out fine. When the IIe boots up
>with the laser card installed, it says"DOS 3.3 FOUND" in the upper right
>hand corner, regardless of what type of disk I put in. Anyways, I dont know
>if this is the type you are looking for (mine has a 5.25 disk drive hooked
>up to it), but you might want to make sure it doesnt share this flaw.

That's definitely not the Laser controller he has in mind (which
I recommended).

The Laser UDC card works fine with ProDOS and I used GEOS
with it on my IIe back in my IIe days.

What does your card look like?

The Laser UDC is a half-length card with two DB ports.  It should
say "Video Technologies" or "V-Tech" on the card.