[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: ImageWriter II self test

Subject: Re: ImageWriter II self test
From: labelas@hotmail.com (Labelas Enoreth)
Date: 1999/08/03
Newsgroups: comp.sys.apple2
References: <19990729052541.13063.00002791@ng-ck1.aol.com> <JLYn3.400$ro.65295@typ12.nn.bcandid.com> <19990729204830.13136.00004483@ng-bh1.aol.com> <P57o3.124$kJ3.30550@news21b.ispnews.com> <37A11F1F.7CCE@svn.net> <labelas-3007990122070001@host-216-76-180-89.psl.bellsouth.net> <37a35ce4.25201726@news2.lightlink.com> <labelas-3107992100010001@host-216-76-180-68.psl.bellsouth.net> <1dvvgg0.j04i551c5c477N@dempson.actrix.gen.nz> <labelas-0108992248500001@host-216-76-180-42.psl.bellsouth.net> <1dvxkzk.o28tuizwi1r4N@dempson.actrix.gen.nz>

In article <1dvxkzk.o28tuizwi1r4N@dempson.actrix.gen.nz>,
dempson@actrix.gen.nz (David Empson) wrote:

> I'd have the dig out the manual.  It is either the Line Feed or Form
> Feed button.  One of them puts it into hex dump mode, the other runs the
> self test.

> In both cases, hold the button down while turning the printer on.  (If
> it doesn't start printing the test page almost immediately, then turn it
> off again and try with the other button.)
> 
> To stop the self test, turn the printer off again (it keeps printing the
> character set in a cyclic pattern).
Thanks...
hex dump mode? I don't remember this mode for the IW?

Follow-Ups:
- Re: ImageWriter II self test
  - From: dempson@actrix.gen.nz (David Empson)

References:
- Report: UniDisk 3.5 to Apple 3.5 conversion (lobotomy) works
  - From: supertimer@aol.com (Supertimer)
- Re: Report: UniDisk 3.5 to Apple 3.5 conversion (lobotomy) works
  - From: Randy Shackelford <shack@onyx.southwind.net>
- Re: Report: UniDisk 3.5 to Apple 3.5 conversion (lobotomy) works
  - From: supertimer@aol.com (Supertimer)
- Re: Report: UniDisk 3.5 to Apple 3.5 conversion (lobotomy) works
  - From: Randy Shackelford <shack@onyx.southwind.net>
- Re: Report: UniDisk 3.5 to Apple 3.5 conversion (lobotomy) works
  - From: Paul Grammens <grammens@svn.net>
- Re: Report: UniDisk 3.5 to Apple 3.5 conversion (lobotomy) works
  - From: labelas@hotmail.com (Labelas Enoreth)
- Re: Report: UniDisk 3.5 to Apple 3.5 conversion (lobotomy) works
  - From: edhel@LOSETHECAPITALWORDSapple2.com (Edhel Iaur, Esq.)
- Re: Report: UniDisk 3.5 to Apple 3.5 conversion (lobotomy) works
  - From: labelas@hotmail.com (Labelas Enoreth)
- Re: Report: UniDisk 3.5 to Apple 3.5 conversion (lobotomy) works
  - From: dempson@actrix.gen.nz (David Empson)
- Re: Report: UniDisk 3.5 to Apple 3.5 conversion (lobotomy) works
  - From: labelas@hotmail.com (Labelas Enoreth)
- ImageWriter II self test
  - From: dempson@actrix.gen.nz (David Empson)

Prev by Date: Re: PC to Prodos disk - problems still
Next by Date: Re: A2 Users: Endanged Species? I think not.
Previous by thread: ImageWriter II self test
Next by thread: Re: ImageWriter II self test
Index(es):
- Date
- Thread