Re: More fun at the thrift store

[salfter@chakotay.ncc74656.org (Scott Alfter)]

In article <05065A13F916ADE1.9AE84E7043463FB4.AA7DBF6F9B354278@library-proxy.airnews.net>,
creslin  <reply.by.newsgroup@nospam.com> wrote:
>the error i was getting during the self-test went away when i pulled the
>zip gs out.  as i read the A2 faqs i learned that the error message is
>related to timing, and normal when a fully functional zip gs installed. 
>but i still need the jumper settings for that card.

Here are the ZipGS switch settings:

1-1 Cxxx/Dxxx cache disable (default: on--enables caching of 0xC000-0xDFFF)
1-2 joystick delay (default: off--slows system down for joystick access)
1-3 AppleTalk delay (default: on--allows AppleTalk to work properly)
1-4 counter delay (default: off--self-test will fail)
1-5 CPS follow (default: off--ZipGS disables @ 1 MHz)
1-6 ZipGS disable (default: on--ZipGS enabled at boot)
1-7, 1-8 cache size
    size 1-7 1-8
    ---- --- ---
     8K   on  on
    16K   on off
    32K  off  on
    64K  off off

2-1 through 2-7 slot delay (enabled for slot n when switch n is on)
2-8 speaker delay (default: off--doesn't slow down for 0xC03x access)

  _/_
 / v \
(IIGS(  Scott Alfter (salfter at (yo no quiero spam) delphi dot com)
 \_^_/  http://people.delphi.com/salfter