[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Harddrive on a II+???
- Subject: Re: Harddrive on a II+???
- From: dempson@actrix.gen.nz (David Empson)
- Date: 1999/03/09
- Newsgroups: comp.sys.apple2
- Organization: Empsoft
- References: <GeKE2.3296$wS.61747@newsfeed.slurp.net> <7c13qt$8so$1@pale-rider.INS.CWRU.Edu>
John L. Graham <fl332@cleveland.Freenet.Edu> wrote:
> Hmmm, if'n I recall right ProDOS v1.9 was the first to require an
> enhanced IIe. I run ProDOS on II+'s with 64 kb of RAM all the time.
> The trusty rusty II+ makes a great data logger and tinkering machine.
ProDOS-8 2.0.x requires a 65C02 or later processor (IIgs, IIc or
enhanced IIe, or a ZIP chip in an unenhanced IIe or ][+).
ProDOS-8 1.9 and earlier will work on a 64K Apple ][+, but not on an
Apple ][, unless its firmware has been upgraded to Applesoft with
Autostart ROM (on the motherboard, not on a ROM card).
Note that the ][+ (or ][) must have a language card in slot 0, and a ][
must have the full complement of 48K RAM on the motherboard.
The improved "quit" program selector in ProDOS-8 1.9 requires a IIe with
an 80-column card, so you will be limited to the old "type in the prefix
and pathname" quit code on a ][+. You can avoid this by using a
third-party program selector which replaces the quit code with something
more usable.
--
David Empson
dempson@actrix.gen.nz
Snail mail: P.O. Box 27-103, Wellington, New Zealand