Re: HELP! How to play Audio CDs on IIGS?

[Rubywand <rubywand@swbell.net>]

CPT FA writes ...
> 
> I seem so close but yet so far.  I have a NEC MultiSpin 2X chained into a RF
> SCSI v3.01e with the RF NEC Media Driver loaded, and the MediaControl CDEV as
> well as the MediaControl NDA loaded.  I try to select the NEC and a port, ie.,
> game,  modem etc., map it to a channel then go to the MediaControler NDA to
> select the device and it tells me "No Connection".  I haven't been able to make
> any combination of RF NEC to portX make a connection. Could anyone shed some
> light on my problem?  CDs like Golden Orchard work fine I just can't get my
> audio CDs to play. Thank you for your assisstance.
 ....

     First, it is probably a good idea to set RamFAST settings the same
as when you access Golden Orchard.

     In the Media Ctrl control panel, you select, say, RF.NEC, Game
Port, and Channel 1. You need to _close_ the control panel in order to
save your setup (in a file named "Media.Setup" in the same Media.Control
folder which contains your media control driver).

     Next, you start the Media Controller from the Apple menu. Click
Channel 1 if it is not already slected. You should see "1-RF/NEC" in the
center panel. Both speaker symbols should be highlighted under "AUDIO".

     Make sure stereo headphones or powered stereo speakers are plugged
into the sound output jack on the CD drive. Click on the "PLAY" button
and adjust the volume on the CD drive.   



Rubywand