Re: Monitoring Program

[Ingo Soetebier <ingo@igd.fhg.de>]

David Empson wrote:
> 
> The original IIc firmware doesn't have a miniassembler.  It was added in
> the revision which supports the UniDisk 3.5 drive (the second release).
> 
> To find out which firmware release is in your IIc, get into BASIC and
> type PRINT PEEK(64447).
> 
> If the number printed is 255, then you have the original firmware and
> need an upgrade to use a UniDisk 3.5 (or the miniassembler).
> 
> The other possible values are 0 (UniDisk 3.5), 3 (memory expansion), 4
> (memory expansion with bug fixes), or 5 (IIc+).
> 
> --
> David Empson
> dempson@actrix.gen.nz
> Snail mail: P.O. Box 27-103, Wellington, New Zealand

It seems I have got the original firmware.

To ask another stupid question: Is the UniDisk 3.5 drive the disk drive
that came with the Apple IIgs? I also have an Apple IIgs and a Mac SE.
The Apple IIgs Drive works also on the Mac SE and has a eject button.
(It's the only Apple 3.5" drive I've seen, which has an eject button.)

At least I know what I'm doing over the weekend! :-)

Bye 
Ingo
-- 
/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\
\                                                                    /
/     Fraunhofer IGD          Abt. Animation und Bildkommunikation   \
\     Rundeturmstrasse 6      EMail: mailto:ingo@igd.fhg.de          /
/     64283 Darmstadt         WWW:   http://www.igd.fhg.de/~ingo     \
\     Germany                                                        /
/                                                                    \
\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/