Re: Apple Disk Transfer Program Horror Story Number 1

["Mark Piazza" <piazza@servtech.com>]

Just a suggestion, drop out of windows!
Go directly to DOS do not pass go, do not collect $200.
I have similar problems, like if my modem is connected to somewhere using
COM3, my COM1 port doesn't work, they all share interrupts, even though the
address of the port may be different.  To exclude all interference just run
this DOS based program in DOS.
You should also check to see if the base address that ADT is sending data
to, if I remember right there is an option to use (02E8,02F8,03E8, and 03F8)
with IRQs (3,4)...  Make sure it is picking the right ones for that port.

--Mark Piazza (piazza@servtech.com)
http://www.servtech.com/public/piazza/markpage

Vs lbh pna ernq guvf, lbh ner rvgure irel tvsgrq be unir gbb zhpu serr gvzr
ba lbhe unaqf.


David Pollen wrote in message ...
>Subject:  Trouble Shooting Recommendations Sought for Apple Disk
>Transfer Program 1.20
>
>

<SNIP
>When I run ADT on my PC under windows 95, it will not
>let me select serial port 2. EVER.  At any speed!
>
>This is the only external port I have.
>I cannot get it to take any speed at all.
>However, it always will accept serial port #1 which cannot
>be used cause there is no physical hookup in back.  Always.
>At every speed.
<SNIP>
>
>pollen@netcom.com
>--
>David Pollen                                             pollen@netcom.com