Re: Apple Imagewriter LQ

[babarstcyr@aol.com (BabarStCyr)]

In article <1d6j1ls.wgsf3v1su6gn4N@dempson.actrix.gen.nz>,
dempson@actrix.gen.nz (David Empson) writes:

>I expect there will be a DIP switch on the LQ motherboard to disable the
>card, as there is in an ImageWriter II.

Yes.

>- Make sure the DIP switches in the LQ are set to match the IIgs Control
>Panel settings, particularly the baud rate and data format.

Direct Connect CDEV settings:
For IW2: Click on Standard Setting ;-)
For IWLQ: Click on Standard Setting then choose 19600 bauds.

IWLQ supports standard easter eggs:
PowerOn + Paper = setting sheet
PowerOn + Select = hex dumper

My IWLQ returns ROM version = 02 and Ram = 0kb.
A Ram upgrade in preparation...


Babar de Saint Cyr           (France)
LCD Apple 2c, WorkStation Apple2e, AppleTalkized IWLQ, 11.25 Mhz TWGS, etc...
;-)