[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: How to burn a ProDOS or HFS CD-ROM on a PC?

Subject: Re: How to burn a ProDOS or HFS CD-ROM on a PC?
From: mportune@telerama.REMOVETHIS.com (Matt Portune)
Date: 1998/03/12
Newsgroups: comp.sys.apple2
Organization: Avatrax
References: <19980311034200.WAA19691@ladder03.news.aol.com>

In article <19980311034200.WAA19691@ladder03.news.aol.com>, supertimer@aol.com (Supertimer) wrote:
>What type of hardware and software is needed to burn a ProDOS
>or HFS CD-ROM from a Windows/DOS PC?  ISO9660 is no good
>because it leaves the ;1 suffix and can't store extended files (I know
>it works with .shk files, but that would require unpacking).

It ain't gonna happen with ProDOS.  HFS however, is possible, but you'll need 
all the contents pre-set up on an HFS SCSI hard drive, and a copy of CeQuadrat 
WinOnCD v3.0 or higher (preferably 3.5).  With that drive hooked up to the PC, 
WinOnCD can burn HFS or hybrid CDs.

- Matt Portune
  Visit the Blue Monday BBS at Avatrax!
  http://www.avatrax.com

References:
- How to burn a ProDOS or HFS CD-ROM on a PC?
  - From: supertimer@aol.com (Supertimer)

Prev by Date: Re: Was the C-Drive IIc internal hard disk ever built?
Next by Date: Re: Help me read a SuperText disk!
Previous by thread: How to burn a ProDOS or HFS CD-ROM on a PC?
Next by thread: Re: How to burn a ProDOS or HFS CD-ROM on a PC?
Index(es):
- Date
- Thread