[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: What 3.5 drive will work with my //c?
- Subject: Re: What 3.5 drive will work with my //c?
- From: david@uow.edu.au (David Wilson)
- Date: 1997/09/23
- Newsgroups: comp.sys.apple2
- Organization: University of Wollongong, NSW, Australia.
- References: <607asn$k2s$1@oksennus.binary.net>
jsassman@binary.net writes:
>My ][C says '0' when I enter that basic 'program'--
>PRINT PEEK (64447)....But it has both a Rom upgrade
>to use the Unidisk drives--I currently have two of
>them connected, AND it has the Applied Engineering
>Z-Ram Ultra 1 meg board....But according to your
>post, Nathan, this model should not be capable of
>memory expansion. If that's correct, then when I
>run Appleworks and it says I have a desktop of some
>644k available it must be kidding around?? ;)
The expanded memory that plugs into a version 3 or 4 //c
is an slot 4 "Slinky" style card rather than the Aux slot
style card you must have. The Aux slot style card cannot
be booted from.
--
David Wilson Dept CompSci Uni Wollongong Australia david@cs.uow.edu.au