[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: IIgs internal fan hookup question...
- Subject: Re: IIgs internal fan hookup question...
- From: cplater@rattlehead.pass.wayne.edu (Charles A. Plater)
- Date: 1997/09/17
- Newsgroups: comp.sys.apple2
- Organization: Wayne State University
- References: <pdueck-1709971532440001@dial24.pli.mb.ca>
Perry Dueck (pdueck@pli.mb.ca) wrote:
: If one were to install an internal fan in an Apple IIgs, what is the
: proper Amps level that the fan should be rated at, in order to connect it
: to the two pin fan connector at the rear of the IIgs motherboard?
: I pulled a perfectly good working fan out of a non-functioning 386sx power
: supply. This fan I have is an NMB "FLOW MAX", and it is rated:
: DC +12V 0.14 Amps. Is this the proper amperage level, or is it too low
: or too high?
: What was Apple's IIgs fan rated at (just for comparison)?
Speaking of GS Fans, I was looking at the Tech Info Library on
www.apple.com, and I was suprised to see that a GS tech note had been
updated as of 2/97, and the tech note dealt with why you need a fan in a
GS.
--
Charles A. Plater, Applications Specialist III, Wayne State University
o Junior Deacon Lola Valley Lodge #583 F&AM o
/^\ Valley of Detroit AASR | Moslem Shrine AAONMS /^\
\/ G \/ Kindness Chapter No. 523 O.E.S. \/ G \/
/ \./ \ cplater@rattlehead.pass.wayne.edu / \./ \
<a href="http://www.ascl.wayne.edu/~cplater>
Check out the Macintosh Evangelist Homepage at
<a href="http://www.evangelist.macaddict.com">
-----BEGIN GEEK CODE BLOCK-----
GCS/MU d-- s++:++ a-- C++++ UL++++ P+ L+++ E W+++ N++ o- K- w--- O- V PS+
PE- Y+ PGP++ t+++ 5 X+++ R tv b++ DI++++ D+ G++ e>e++ h r++ y+
------END GEEK CODE BLOCK------