RamFast confusion

[cjansen@earth.execpc.com (Chris Jansen)]

I examined the partition information on the hard drive using a sector editor today. The data looks OK but the drive 8 volumes on
the hard disk still do not show up under GS/OS volumes in the ramfast utility program.

My next alternative is to try to copy the prodos volume data sector by sector to an empty volume. I know that there are seven
32 Megabye volumes and one 10 Megabyte volume on the problem disk. I have verified that the data is still there with the sector
editor. I can search from the beginning of the hard disk for prodos boot blocks. Once I find them I can copy $FFFF blocks to
another empty volume. I think I can rescue all my data that way.

One other question. My ramfast manual (wood pulp based) said that there was once a programmers manual to the ramfast card. Is
this still available. I would like to look at the sectors of a hard disk at the drive firmware level rather than at the prodos
volume level.

Any help would be appreciated.

Chris