Re: GV Plat: problems resetting

[Z <dont_reply_to_me@this.address>]

sde@globalserve.net wrote:
> 
> Does anyone have any suggestions on how I can reset GV Plat without
> shutting down?  Everytime NN crashes due to type 11 errors, I'd be forced
> to restart the CPU.  The problem is the modem still hangs on the line even
> after the restart. The connect light  of the modem indicates that I'm
> still connected .  I checked  the status menu but it indicated that the
> modem is disconnected.  The only way for me reset it is by either shutting
> down the CPU after I restart or by physically disconnecting the modem
> cable from the CPU and re-attaching it.  This is such a hassle since NN
> crashes all the time.
> 
> SDE
> 
> -------------------==== Posted via Deja News ====-----------------------
>       http://www.dejanews.com/     Search, Read, Post to Usenet

Try going into Claris Works Communications (or any terminal program) and
type the following AT commands, ATZ [enter] atv1 [enter] and then at&f1
[enter].  Yes that was ay-tee-vee-one.  If you can't get Claris to
access the modem, try the reset button in the teleport control panel.