Re: settings on a Laser 128

[pubpc1@library.ucla.edu]

Someone asked about setting the port rates on a Laser 128?
You access a control panel, like on the EX/2.  All Lasers
have one.  It is accessed by:

control-reset-P

Only the EX/2 will save the settings to a battery backed
RAM, however.  The 128 and 128EX models lose their memory
each time one powers down.

I'm going to have to write a Laser FAQ. :)
They have decidedly non-Apple quirks (for example, the EX
and EX/2 logic boards run at true 3.6MHz...no caching,
like on the IIc+).

-Scott G.