Re: ImageWriter // Question

[arafel1@ix.netcom.com (Tony Jones)]

Hello:

dalloff@freenet.columbus.oh.us (Dave Althoff) wrote:

>One caution:  Since your SSC is sitting in Slot #2, it is very possible
>that (assuming that this is a second-hand machine) it was configured as a
>modem card.  Things to check--

 The //e is second hand, but I added the SSC. Can I leave it in slot
#2 and change the block to point to terminal or will I have to move it
over to slot #1 to?

>Set the DIP switches on the card as follows for the IW-II:

>(1=ON or CLOSED; 0=OFF or OPEN)
>SW1: 1 2 3 4 5 6 7  SW2: 1 2 3 4 5 6 7
>SW1: 0 0 0 1 0 1 1  SW2: 1 0 0 1 1 0 0

 Thanks for the settings. It should make things alot easier to
configure.


 Tony.


-----------------------------
E-Mail: arafel1@ix.netcom.com