Re: HELP:Modem to Laser 128/EX2 Cable

[tomk@pro-nsdapple.cts.com (Tom Kelly)]

In <3287B8B3.6121@cris.com> Bill Shuff <bill2060@cris.com> writes:

>I need to make a cable to go from a Laser 128/EX2 to a standard DB-25
>modem connector.  The laser is supposed to be a IIc+ clone but the modem
>connector is a DIN-8 not a mini-DIN 8 as I had expected.  Does anyone
>have pin-out information for the modem port on the Laser?  It looks like
>the 5 pin IIc cable would physically plug into the port, but since the
>port has more sockets than the IIc cable has pins, and since it is not
>my computer I did not want to do anything I did not know was safe to
>try.  
>
>I would guess that a Laser Manual or the Proterm 3 manual would be good
>places to look, but I have neither. Help would be greatly appreciated.
>
>Bill Shuff

You might want to look once more, as I recall it is the same as the IIc.
I have the cables for both printer and modem for sale if you need them.
----
ProLine:  tomk@pro-nsdapple
Internet: tomk@pro-nsdapple.cts.com
UUCP:     crash!pro-nsdapple!tomk