[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: AE Ramworks III
- Subject: Re: AE Ramworks III
- From: mpearce@crl.com (Matthew Pearce)
- Date: 1996/09/17
- Newsgroups: comp.sys.apple2
- Organization: CRL Dialup Internet Access (415) 705-6060 [Login: guest]
- References: <51k69v$kcc@jsbach.n2.net>
Clairemont High School (clairmnt@n2.net) wrote:
:
:
: We recently acquired an AE Ramworks II card (1986 rev. F)
: with 512 k that is installed in the aux. slot of a platinum IIe.
:
: It appears to be necessary to format the ram every time
: the machine is powered on before it can be recognized. Is that true?
: I must be missing something, but I'm not familiar with this.
:
I had a RAMWorks card for a few years. If memory serves, AppleWorks 3.0
(and probably later) would recognize the extra RAM w/out the card being
initialized. Other than that, you had to initialize the card with AE's
software before you could use it.
M.P.
--
Looking for software for your Apple IIGS or Macintosh?
Visit http://www.crl.com/~mpearce/GSAUG/Apple.html