Re: Appleworks printing

[Dark_Dude@darkcastle.ecore.fnet.org (Dark_Dude)]

In Article <19960908154400108188@dempson.actrix.gen.nz>,
<dempson@actrix.gen.nz> wrote:


>The card I have here is labelled "APL BOARD   UNIT G479501000-0" (white
>legend), "G479501010-0" (green writing on the PCB layer) and "HCN
>PCB-147F" (white legend).  The ROM just says "APL" on a silver label,
>and it is a 2708 EPROM.  The card is about 4 inches long, and the cable
>header is a 16-pin male IDC connector at the left end of the card,
>pointing upward, with latching levers to hold the cable connector in
>place.
>
>I believe there are several cards called an "EPSON APL", which are quite
>different in design.  Can anyone confirm this?


I have an EPSON APL card here...

It says APL B, unit G479901000-0 (white legend). In green it says:
G479901010-0. There's also E46669-105V near the bottom right condensator. The
serial number is 1800847 and on the back side it says AEAD in black stamped
letters. This card has a 20 pin mail connector. I'm not familiar with
connector types... The kind of eprom: ?? it says 88728 and M2732AFI.

Maybe this is another card, ie another design, but I'm not sure..

               -= Doede =-

--
Alias: Dark Dude               | Internet: dboomsma@sci.kun.nl
       #1@#15 on FutureNet     |   HTTP  : http://www.wco.com/~cturley/db/
       Apple II Forever!       |           1WSW Member, and proud of it!