Re: Vert Centering-Clr monitor

[jpoore@pro-palmtree.cts.com (James Poore)]

Color monitors do vertical and horzontal centering differently than do
monochrome monitors.  Almost all color monitors have either a jumper
arrangement or actual centering controls, sometimes both.
If your monitor has a jumper, there should be 3 tabs that the jumper can be
connected to.  For vertical adjustment the tabs should be marked as 'up',
'down', and center.  If your pix is too high, then you would connect the
jumper to the down tab.  For horizontal adjustment the three tabs should be
marked 'left', 'center', and 'right'.  If your monitor has centering
controls, then adjust for best centering.  Also centering controls are
usually located on the PCB with no access holes, so the back will most
likely have to be removed to get to them.

Jim


-----
The Palmtree BBS  310-453-8726 v.32
Inet: jpoore@pro-palmtree.cts.com