Re: Block 2 hard drive damage

[crownmi@zot.io.org (Myles Fudge)]

In article <fk48709@pro-palmtree.cts.com>,
James Poore <jpoore@pro-palmtree.cts.com> wrote:
>If you have a copy of Prosel 16 on a disk, try booting the Prosel and then
>test the HD using the volume repair utility.

I'd love to give it a try.  However, from my original post:

|Last night the drive suffered damage to block 2 and will not boot.
|In fact, GS/OS hangs when the drive is even on the SCSI chain and
|I'm booting from another disk.

While the 3.5 drive is booting GS/OS the damaged hard drive is polled.
When it is polled, it just hangs the whole system and the drives LED 
blinks off and on, and off and on....

After about five minutes the 3.5 drive continues to boot.  When I try to 
check out the hard drive from the repair utility, only the first volume 
out of 25 on the hard drive is recognized.  Everytime I try to perform a 
command against the hard drive, I get MLI error $2D.


-- 
Myles
crownmi@io.org