RE:SCSI Hard Drive Mechanisms

[Jim.Low@logicbbs.org]

Assuming it's a standard SCSI hard drive and case, all you have to do is buy 
a "bare" SCSI hard drive -- the same ones sold for Macs -- and have it 
installed in the existing case.  The tricky part will be getting the SCSI ID 
selector connectors on the jumper pins -- not only the right way, but even 
if they fit, as jumper pins vary from drive-to-drive.  The easy solution is 
to forget connecting the SCSI selector, and just putting a jumper on a pair 
of pins for a fixed SCSI setting -- or no jumoer at all for a setting of 0.