Re: Question on 3.5" drive and SC Tape Backup

[david@wraith.cs.uow.edu.au (David E A Wilson)]

mkelsey@eecs.wsu.edu (Michael Kelsey) writes:
>Does anyone know what type of cartridge the SC40 Tape Backup requires?

According to the box of tapes I have here:

	Formatted DC 2000
	1/4-inch tape (6.35 mm)
	205 feet (62.5 m)
	12,500 ftpi

Apple part # M0132 for a box of 5.

>inherited an SC40 and two 19pin 3.5" (apple) drives (400k?).  I'd like to
>use the Tape Backup, if at all possible (I can write the software) and I need
>to know if a 400k drive can be connected to a UniDisk 3.5" controller.

The UniDisk 3.5" controller will only run UniDisk 3.5" drives - not any sort
of Mac drive. Some versions of the UDC would run 400K drives.
-- 
David Wilson	Dept CompSci Uni Wollongong Australia	david@cs.uow.edu.au