[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Disks for 3.5" drive

Subject: Disks for 3.5" drive
From: jeffster@netcom.com (The Jeffster!)
Date: 1996/04/22
Newsgroups: comp.sys.apple2
Organization: NETCOM On-line Communication Services (408 261-4700 guest)
Sender: jeffster@netcom2.netcom.com

I have an Apple 3.5" disk drive, and when I see that there is an 800k 
capacity of the disks, I worry, because double-sided, or "low-density" 
disks are formatted to 720k with an IBM. Are regular low-density disks 
usable on the drive? If not, then can I use a high-density disk and just 
have the drive format it to 800k? thanks in advance.

jeffster@netcom.com
-- 
                                             jeffster@netcom.com

Follow-Ups:
- Re: Disks for 3.5" drive
  - From: dempson@atlantis.actrix.gen.nz (David Empson)
- Re: Disks for 3.5" drive
  - From: tcompter@nyx.cs.du.edu (Thomas Compter)
- Re: Disks for 3.5" drive
  - From: ralphp@prysm.net (Ralph Wade Phillips)
- Re: Disks for 3.5" drive
  - From: dalloff@freenet.columbus.oh.us (Dave Althoff)
- Re: Disks for 3.5" drive
  - From: wbaguhn@nyx10.cs.du.edu (Will Baguhn)
- Re: Disks for 3.5" drive
  - From: Jon Camp <jac@silvercity.mv.com>
- Re: Disks for 3.5" drive
  - From: nathan@cco.caltech.edu (Nathan Mates)
- RE:Disks for 3.5" drive
  - From: Jim.Low@logicbbs.org

Prev by Date: Re: Silentype (Re: Apple Thermal Printer)
Next by Date: Looking for Columns for the //e
Previous by thread: Re: Disks for 3.5" drive
Next by thread: Re: Disks for 3.5" drive
Index(es):
- Date
- Thread