[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Q: How to configure IIc Serial Port?

John Dobbins (jad@lns62.lns.cornell.edu) wrote:

: I've just gotten a IIc without documentation of any kind.
: I understand the serial port is built in instead of
: using a Super Serial Card. Are there dip switches inside
: my IIc to configure the port like on the Super Serial Card
: or is it done some other way?

: Thanks
: John Dobbins

Well, for starters, I dunno where you'd plug a card into the //c. There
was barely enough room for my memory expansion card! There are two serial
ports built into the //c and //c+. One for the printer and one for the
modem. The one for the printer can alternately be used for an AppleTalk
interface, if I'm not mistaken. There are no settings for either of the
serial ports. Plug in whatever it is, select "//c serial" from your
software and that's it. The software handles the rest. 

-- 
Mike LaMorte <mlamorte@freenet.columbus.oh.us>
CEO, President, Designer
Aurora Concepts Inc.
Design & Consulting