RAMFAST.SYSTEM Question

[rubywand@aol.com (RUBYWAND)]

    Since my hard disk is independent of the SCSI interface, the RAMfast
rev.D v3.x is connected to just a CD-ROM drive. Everything-- DiscQuest,
CD-ROM music player, Golden Orchard-- works great, except that there seems
to be no way to SAVE the RAMfast "Option" settings to hard disk. 

    When I run RAMFAST.SYSTEM from the RAMfast ROMdisk (or anywhere else)
and click "Install", it says to select a target volume. However, it lists
only whatever volumes may be accessed via CD-ROM and the ROMdisk under
GS/OS Volumes. No hard disk volumes are shown.

    The problem is not getting the RAMfast driver into the SYSTEM/DRIVERS
folder; it's easy enough to just copy it from ROMdisk. The problem seems
to be that Install is supposed to set the destination for saving the
RAMfast config info. 

    When "Options" are set and "SAVED" they will remain in effect through
a re-boot from the desktop. They are forgotten when power is turned OFF. 

    So, what is wrong? How can the settings be saved to hard disk?