Large SCSI HD: How will 105 Megs map to slots?

[buggie@callisto.unm.edu (stephen e buggie)]

I have a chance to get a 105 meg HD for my IIgs.  The 40 megger works great
but the jumbo 105 megger is so cheaply priced.....


But could someone tell me HOW the extra partitions will map to slots and 
drives?   Most of my slots are filled with cards.  Will I lose access to 
the interface cards if the partition-mapping spills over into other slots 
than the slot #7 in which the SCSI card is located?   Or, does it merely 
become Slot 7, Drive 1, Drive 2, Drive 3, Drive 4....?





======================================================\===================

Also, thanks for the advice given by readers on how to launch my IIgs
even when the computer was frozen by an NDA-based incompatibility.   
Steve Disbrow was especially helpful ---- Thanks, Steve.



Steve Buggie			buggie@unm.edu