Re: RAMfast to SCSI cable

[dempson@atlantis.actrix.gen.nz (David Empson)]

In article <4a4bjo$ns6@newsbf02.news.aol.com>,
RUBYWAND <rubywand@aol.com> wrote:
> 
>     For a cable to connect from RAMfast's 25-pin plug to SCSI, which pins
> on the 25-pin plug go to which pins on the SCSI plug?

Why not just buy a cable and avoid any potential disasters?  They are
dirt cheap (about NZ$15 here, which is about US$10).

If you make any mistakes with a SCSI cable, you are likely to damage
the SCSI card as well as the drive mechanism (a friend of mine managed
to blow up a SCSI mechanism by plugging a cable in upside down).
-- 
David Empson
dempson@actrix.gen.nz
Snail mail: P.O. Box 27-103, Wellington, New Zealand