Re: apple ][ <-> apple ][+

[shack@onyx.southwind.net (Randy Shackelford)]

Todd P. Whitesel (toddpw@mix.ugcs.caltech.edu) wrote:
: suprdave@aol.com (SUPRDAVE) writes:

: The ROMs could work in either machine, and could be put on a ROM card in slot
: 0 so you had both ROMs available. This ROM card has a long red switch handle
: on the back. Flip it down to get the motherboard ROMs, and up to get the
: card's ROMs. You'll need to reset the machine or power it up after changing
: the switch.

One small detail worth mentioning is that you must solder across the pad 
labeled F8 on this card to get the card's F8 ROM to be active when the switch 
is up. Otherwise the F8 on the logic board is always used.

Question for the original poster: I take it your ][ doesn't have the card 
underneath the keyboard with the switch to set whether you press ctrl along
with reset to do a reset? My ][ has this. 
--
Randy Shackelford                                 I was internet
shack@southwind.net                               when internet wasn't cool